Get In Touch +1 (888) 379-6614
authorized dealer, shop your favorite brand.
Expert Support,
Dial +1 (888) 379-6614
Limited Supply,
grab it before it's gone.
Lowest prices,
As low as possible.
All Items are brand New,
Never used.
Popular Add-Ons
$200.00
$70.00
$100.00
$30.00
Bundle Offer
$300.00
$100.00
Recently Viewed Products
- $7,519.99
$7,999.99- $7,519.99
- Unit price
- per
- From $940.99
$1,000.00- From $940.99
- Unit price
- per
- $2,350.99
$2,500.00- $2,350.99
- Unit price
- per
- $1,410.99
$1,500.00- $1,410.99
- Unit price
- per
- $1,155.99
$1,229.00- $1,155.99
- Unit price
- per
- $1,983.99
$2,110.00- $1,983.99
- Unit price
- per
- $4,229.99
$4,499.99- $4,229.99
- Unit price
- per
- From $1,503.99
$1,599.99- From $1,503.99
- Unit price
- per
Penguin Chillers 1/2 HP Water Chiller
The Penguin Chillers 1/2 HP Water Chiller is a reliable and precise chiller designed to maintain the perfect temperature for your ice bath. With a cooling power of 5,000 BTU/hr, this chiller can keep your cold plunge at temperatures as low as 37 °F, even in the summer heat.
Operating the chiller is incredibly easy. Simply plug it in using its 6-foot power cord, and it will run efficiently on 110-120 volts, drawing only 3.9 amps and consuming a mere 450 watts. Additionally, this chiller has an operational sound level of only 56 dBA, making it very silent.
For those interested in setting up a DIY cold plunge setup, this chiller can be used in combination with a pump, tubing, and filters. The Danner Mag-drive pump with a flow rate ranging from 950gph to 1800gph is recommended, and any highly-rated 10-inch filter housing + 50 micron filters will be perfect for filtering your water. If alternative pumps are preferred, particularly those rated in horsepower, technical support is available to guide users in ensuring compatibility with the chiller.
For optimal control over water temperature, the digital controller consistently monitors incoming water temperature. If the temperature goes above the set point, the chiller activates, and once the desired temperature is achieved, it turns off, ensuring energy efficiency.
Overall, the Penguin Chillers 1/2 HP Water Chiller is a reliable and high-quality cooling system that delivers powerful and efficient water temperature regulation. Its compact design, digital controller, and optimal connectivity make it easy to install and use, while its energy-efficient and quiet operation ensure effective cooling without compromising performance.
Features
- Compact Design: With dimensions of 16.25”W x 14.75”D x 12”H and a weight of 39 pounds, this chiller is both space-saving and easy to install.
- Powerful Cooling: Delivering a respectable 5,000 BTU/hr, it ensures consistent and efficient water temperature regulation.
- Digital Controller: The included controller constantly monitors the water temperature and activates the compressor and fan to begin dropping the water temperature when it goes higher than the desired level.
- Optimal Connectivity: Equipped with 1" NPT inlet/outlet ports that offer seamless connectivity and straightforward installation.
- Energy Efficient: Operating on 110-120 volts and consuming only 450 watts, it's designed for optimal energy conservation without compromising performance.
- Quiet Operation: With a sound level of just 56 dBA, it ensures effective cooling without the annoying noise.
- USA Proud: Manufactured with precision and pride in the USA, this chiller promises reliability and top-notch quality.
Specifications
- This chiller has dimensions of 16.25”W x 14.75”D x 12”H and weighs only 39 pounds, making it a perfect fit for your cold plunge setup without taking up unnecessary space.
- The chiller produces 5,000 BTU/hr of cooling power and has a sound level of 56 dBA.
- The recommended Danner Mag-drive pump is 950-1800 gallons per hour
- Features 1" NPT inlet/outlet ports, making it easy to connect to a tub. The power source is a single-phase 110-120 volts, 3.9 amps, and 450 watts.
- Chiller comes with a titanium heat exchanger, digital controller, and 6-foot power cord.
| HP | BTU/hr | Voltage / Amps / Watts / Phase | Dimensions | Weight |
|---|---|---|---|---|
| ½ | 5,000 | 110-120V / 3.9A / 450W / Single | 16.25"W x 14.75"D x 12"H | 39 lbs |
| ½ HE | 5,750 | 110-120V / 3.9A / 450W / Single | 16.25"W x 14.75"D x 12"H | 40 lbs |
| 1 | 10,000 | 110-120V / 7.2A / 830W / Single | 19.25"W x 19.75"D x 14.25"H | 58 lbs |
| 1 HE | 11,500 | 110-120V / 7.2A / 830W / Single | 19.25"W x 19.75"D x 14.25"H |
What our Experts Think
-
Cooling Capacity: The Penguin Chillers 1/2 HP Water Chiller is designed to efficiently cool water in various applications, such as cold plunge tubs and aquariums. Users have reported that it can lower the temperature of a 100-gallon tub by approximately 3-5°F per hour, effectively maintaining temperatures as low as 39°F.
-
Construction and Design: The chiller features 1" female threaded PVC fittings for water connections. When installing, it's recommended to use Teflon tape and avoid over-tightening to prevent damage. Proper ventilation is crucial; ensure at least 6 inches of clearance on the sides and top, and 12 inches at the back to allow adequate airflow and prevent overheating
-
User Experiences: Feedback varies among users. Some have praised the chiller for its performance and customer service, noting its ability to maintain consistent low temperatures. Others have reported issues such as noise, slow cooling, and challenges with customer support. Additionally, there are mentions of potential refrigerant leaks or the need for recharging after about a year of use.
-
Maintenance and Care: To ensure longevity and optimal performance, it's essential to maintain proper water flow. Users have noted that using filtration systems can sometimes lead to issues like heat exchanger cracks if water flow is restricted. Regularly checking and cleaning filters, as well as ensuring the pump operates within recommended flow rates (500–1,800 gallons per hour), can help mitigate such problems
Q&A
Q: What is the Penguin Chillers 1/2 HP Water Chiller used for?
A: It's designed to efficiently cool water in hydroponics, aquariums, brewing systems, and more.
Q: What system size is it best for?
A: Ideal for systems up to 150 gallons, depending on ambient temperature and cooling needs.
Q: Is it energy efficient?
A: Yes, built for high efficiency with lower power draw and fast cooling performance.
Q: Is setup complicated?
A: No, it features plug-and-play installation with standard ¾" fittings.
Q: What refrigerant does it use?
A: It uses eco-friendly R-410A refrigerant for safe, efficient cooling.
Q: How quiet is the operation?
A: Engineered for quiet operation, great for indoor use.
Q: Is it made in the USA?
A: Yes, proudly manufactured in the USA with premium components.
Maintenance Tips
-
Clean Air Filter Monthly: Promotes airflow and prevents overheating.
-
Flush System Quarterly: Prevents scale buildup and keeps cooling efficient.
-
Check for Leaks & Hose Wear: Tighten fittings and replace damaged parts.
-
Monitor Coolant Flow: Ensure pump and chiller are operating smoothly.
-
Keep Vents Dust-Free: Wipe and vacuum to maintain airflow.
-
Drain & Store Properly When Not in Use: Prevents internal damage.
Let customers speak for us
Related Products
Trusted Payment
Shop securely with our encrypted checkout system and various payment options.
Free Shipping
Enjoy free delivery on all orders with fast, reliable shipping.
Certified Retailer
Official distributor of premium brands with authentic products.
Dedicated Support
Our team is available 7 days a week for product help and support.
- Choosing a selection results in a full page refresh.